How To Repair Electric Stove

Electric Stove Burner Repair Tips

Electric stove burner repair tips: Simple fixes solve nearly issues

Electric Stove Burner Family Handyman

Y'all can solve about electrical range burner problems yourself and avoid the expensive service call. Information technology'due south quick and easy to supercede a burner or bad burner socket.

You might likewise like: TBD

Step 1: Replace bad electric stove summit burners or sockets

stove burner repair

Photo 1: Check the stove burner

Test the electric stove top burners past replacing the burner that doesn't work with ane that you know does.

stove burner repair electric stove coil replacement

Photo ii: Replace the socket

Replace a stove burner socket if information technology'south charred or corroded. Remove the screw that attaches the socket to the range. Unscrew the wires and reconnect them to the new socket. Adhere the new socket.

If one of your electric stove top burners isn't heating, information technology could be a bad burner, a bad connection in the burner socket or a faulty switch.

To encounter if the problem is the burner, exchange the burner with ane that y'all know works (Photo 1). If that burner won't heat, the trouble is either the burner socket or the infinite switch. (The burner prongs plug into the burner socket.) Connections in the burner socket can fire out and fail to provide power. If the prongs look burned, inspect the socket. If the socket looks charred or burned, supercede it. Photo 2 shows how to replace a burner socket.

Circumspection: Always unplug your electric range before working on information technology.

Step ii: Supersede the switch

Photo 3: Exam the switch

Test the switch. Unplug the range and turn on the stove burner. Remove the wire from the H1 terminal. Set the tester to RX-1 and place the probes on the H1 and H2 terminals. Replace the switch if the tester reading doesn't alter.

stove burner repair

Photograph 4: Replace the switch

Remove the knob and the screws that concord the old switch in place. Install the new switch and supersede the screws. Yous may have to install one of the included adapters then your knob will fit.

The knob you lot turn to control the stove burner temperature slides over the shaft of the space switch. If the switch burns out, your burner won't get power. Test the infinite switch if y'all know the burner and burner socket are good but the burner all the same won't heat. We removed the back panel to access the infinite switch. Your range may be different. With the range unplugged, test the switch with a multimeter set to RX-1 (Photo 3). If the meter reading remains the same, the infinite switch is bad and should exist replaced (Photos 3 and 4).